Windows 10 includes built-in troubleshooting tools to help you fix problems if you ever find yourself stuck and unsure of what to do. The automatic repair tool is one example of such a useful tool. It’s a helpful fix that checks for and fixes problems that prevent normal booting.
However, what should be done if an error is brought on by the tool itself? If your computer is in an endless cycle of self-repair, we have compiled a list of potential fixes for you to try.
What Is an Automatic Repair Loop, and What Causes It?
Windows 10 may get stuck in a never-ending cycle of trying to repair itself via the automated repair tool if the operating system’s initial boot attempt fails. When Windows fails to fix itself, it reboots and starts the process all over again.
Loops in Windows 10’s automated repair feature might be difficult to diagnose because of the variety of potential causes. The most common cause is damaged or missing system files, which prevent Windows from starting or repairing itself.
It’s also possible that missing device drivers are at blame. In order for Windows to recognize and make use of your PC’s new hardware, device drivers must be installed. A repair loop may be triggered by a lack of drivers, outdated drivers, or drivers that aren’t supported. This error can also be caused by the improper installation of drivers for a new device’s peripherals.
Other potential causes include malfunctioning parts, virus infections, corrupted system registries, and damaged installation files. However, there is no need for an alarm, since our fixes should fix the automatic repair loop on Windows 10 for the vast majority of users.
Start by Executing the Fixboot and Chkdsk Commands.
There may be times when you need to use system repair tools to attempt and fix a problem with Windows 10, even if you haven’t been able to determine what caused the automatic repair cycle in the first place. Using the chkdsk command, you can initiate a thorough error scan of your system drive with the Check Disk software. It will automatically correct any problems it finds.
Even if Windows fails to start, you can still use the Command Prompt by selecting the option to boot into command mode from the Advanced menu.
And here’s how:
After powering on your computer, quickly press the F8 key before the Windows logo and spinning gear symbol show. In doing so, Windows will display its boot troubleshooting menu. To start, select the tab that reads View more complex repair choices.
The Command Prompt can be accessed from the Troubleshoot menu of the Select an option screen.
Read More: Best 6 Ways to Fix an Sd Card That Is Blank or Has an Unsupported File System!
When Prompted, Type the Following Into the Command Prompt Box and Hit Enter:
Fixboot Is an Alternative to Chkdsk that Can Be Used in Case the Former Fails. Type This Command Into the Command Prompt Window You’re Already Using and Hit Enter: When You’re Done, You Can Shut Off the Command Prompt Window and Reboot Your Computer.
2: Scan the Computer in Safe Mode
When Windows Detects Faulty Files, It Replaces Them With A Copy from The Local Disc Using the System’s Repair Capabilities. if This Image Is Corrupted, Windows Cannot Perform Self-Repair, and The Preceding Commands Will Not Work. the Dism Tool (Deployment Image Servicing and Management) Can Be Used to Fix This.
Safe Mode Must Be Activated Before We Can Use This Tool. if You’re Having Trouble Getting Windows to Load, Using This Method Will Load a Stripped-Down Version of The Operating System.
The First Thing You Should Do Is Restart Your Computer, Like Previously, Use the F8 Key During Boot to Get the Windows Boot Troubleshooting Menu.
Click Advanced Repair Options > Troubleshoot > Advanced > Startup Settings > Restart.
You Will Now Be Presented with A Menu of Restart Choices. for Safe Mode with Networking, Use the F5 Key on Your Keyboard.
You Will Now Be Presented with A Menu of Restart Choices. Select F5 on Your Keyboard to Activate Safe Mode with Networking.
It Will Take Some Time to Do This. in Order to Access the Power Shell Window in Safe Mode Once Again After the Dism Program Has Completed Processing, You Will Need to Restart Your Computer and Then Repeat the Steps Outlined Above.
Now, Enter the Following Command and Hit Enter:
When Prompted to Overwrite Files, Type “all” and Hit Enter.
As Soon as You Are Done, Restart Your Computer.
Managing the Self-Repair Cycle?
Dealing with A Never-Ending Cycle Caused by A Solution-Oriented Tool Can Be Quite Annoying. This Is Not Always Easy to Figure Out, but Our Remedies Can Get Your Computer Back to Normal in No Time.