Well, an encryption unsuccessful error is a serious problem that shouldn’t be taken lightly. The Android encryption unsuccessful error screen makes it impossible for Android phone owners to use their phones or get to the information they have stored on them. It’s a strange mistake that happens sometimes.
When you are using your phone normally, it will suddenly stop working. When you turn it back on, an error message that says “encryption failed” shows up on the screen. This message shows up on the main screen, where there is only one option, “Reset Phone.”
The whole error message looks like this:
“Encryption was stopped, so it can’t be finished. Because of this, you can’t get to the information on your phone.
You need to do a factory reset on your phone before you can use it again. When you set up your phone again after a reset, you’ll be able to bring back any information that was backed up to your Google Account “.
Read on to find out what causes Android encryption unsuccessful error and how to fix it.
Read More: How to Block Text Messages on Your I iPhone and Weed out Messages from Unknown Senders!
Part 1: What Causes an Encryption Error?
The Android encryption failed error could be caused by a number of problems with your device or its software, and we can’t point to a single cause. Many Android users think that an encryption unsuccessful error means that your phone can’t find its internal memory.
One of the main reasons for Android encryption’s unsuccessful error is a cache that is broken or full. Such an error makes it impossible to get the phone into the encrypted state. This means that an encryption unsuccessful error prevents your device from encrypting normally and makes it hard to use. Even if you restart your phone more than once, the message “Encryption failed” will always show up.
The “Encryption Failed” error screen is very scary because it only gives you one option, “Reset Phone,” which will delete everything on the phone if you choose it. Many users end up choosing this option and then manually resetting their system by flashing a new ROM. But this is easier said than done, and people who get the Android encryption unsuccessful error are always looking for guides and detailed explanations.
In the next two sections, we’ll talk about the best way to deal with the “Encryption Failed” error.
Read More: Jio TV Download for Smart TV: How to Install JioTV on TV to Watch Free Live TV Channels
Part 2: Fix the Error “Encryption Failed” With A Single Click
We know how stressed you may be because of how bad the Android encryption error is. Don’t worry, though! Dr.Fone – System Repair (Android) is a simple tool that can fix all of your Android problems, including encryption problems, with just one click.
You can also use the tool to quickly fix problems like an Android device stuck on a “blue screen of death,” an Android device that won’t respond or is “bricked,” apps that keep crashing, etc.
If you fix the Android encryption error, you might lose all of the data on the device at once. So, before using Dr.Fone – System Repair (Android) to fix an Android system, it’s important to make a backup of the device just to be safe.
Phase 1: After getting ready, connect the device.
Step 1: Open Dr.Fone – System Repair (Android) and tap the “System Repair” tab on your computer’s software interface. Now, use a USB cable to connect the Android device.
Step 2: In the next window, choose “Android Repair,” then click the “Start” button.
Step 3: Now, put information about your Android device on the screen for device information. Then, click “Next.”
Step 2: Go to “Download” mode and fix it.
Step 1: To fix the problem with encryption not working, put your Android in “Download” mode. Here’s what will happen –
Get your device without a “Home” button and turn it off. Hit “Volume Down,” “Power,” and “Bixby” on the keyboard for about 10 seconds. Let them go before tapping the “Volume Up” key to enter “Download” mode.
If you have a device with a “Home” button, you need to turn it off as well. Hold down the “Power,” “Volume Down,” and “Home” keys for 5 to 10 seconds. Leave these keys alone before pressing the “Volume Up” key to enter “Download” mode.
If you have a device with a “Home” button, you need to turn it off as well. Hold down the “Power,” “Volume Down,” and “Home” keys for 5 to 10 seconds. Leave these keys alone before pressing the “Volume Up” key to enter “Download” mode.
If you have a device with a “Home” button, you need to turn it off as well. Hold down the “Power,” “Volume Down,” and “Home” keys for 5 to 10 seconds. Leave these keys alone before pressing the “Volume Up” key to enter “Download” mode.
Part 4: How to fix the error “Encryption failed” by flashing a new ROM?
This is yet another unusual and unusual way to fix the encryption failed error.
Now, we all know that Android is a very open platform that lets its users change its versions by downloading and installing new ROMs that they have made themselves.
So, the open platform of Android is a very important part of fixing this error. This is because flashing a new ROM is a very good way to fix the Android encryption unsuccessful problem.
Changing the ROM is easy. Here are the steps you need to take:
First, make a copy of all your data, settings, and apps on the cloud or your Google Account. Just look at the picture below to learn how and where to do it.
