Exactly what goes wrong for our once-gorgeous phone cases to become looking so dreadful? Because we use our phones every day, they are subjected to the elements, including sunlight, humidity, heat, dust, friction, and so on.
This leads to ongoing wear and tear on their surfaces, which can lead to stains. There may not be any obviously dirty areas on your phone case, but it’s still a good idea to maintain it clean to avoid spreading germs. Consider that your phone could be dirtier than a toilet seat. We’ve compiled a list of options for cleaning your phone case, separated out by material:
Cell Phone Cases; Plastic & Silicone
The best approach to clean silicone phone cases is to start with a mixture of dish soap and water. Soak your phone case in the soapy water for a few minutes. The case may need a weight on top of it to stay underwater.
Use a toothbrush as a scrub tool to remove stubborn stains and clean the area around the borders. If you have a very tenacious stain, baking soda can help. Repeat this process until all dirt is removed, and then wash the case with cold water to remove any residue.
Even on cases made of transparent plastic, it’s effective. Once you’ve removed all of the water, you may dry your case with a microfiber towel without damaging the finish. Our suede microfiber cloth is ideal because it is ultra-plush and won’t leave behind any lint or stains thanks to its flat weave. If you want to be sure there’s no moisture left in the case after you’ve cleaned it, you should wait an hour before putting it back on your phone.
Read More- What Is Music4newgen? Know More About This!
Then Your Cell Phone Case Is White
In the same way, if your silicone phone cover is white and only slightly soiled, you can wash and dry it in the same way as described before. However, white cases tend to show dirt and stains more quickly since they reflect light. Therefore, combine bleach and water in a basin if you require a more potent cleaner for your white phone case.
Too much bleach might deteriorate silicone housings, so use caution. Your case can be disinfected by soaking it in a solution made from one teaspoon of bleach and a cup of warm water. There should be less yellowing and staining after using the bleach.
Contact Lens Case
Rubber phone cases are just as simple to clean as their silicone counterparts, using only a solution of dish soap and water. This is the bare minimum for cleaning phone casings. Cleaning the case is as simple as soaking it in soapy water and then using a toothbrush to scrub the edges. In order to clean the rubber housing, simply use a microfiber cloth.
Isopropyl alcohol can be used to further remove stubborn stains from your rubber phone case. Your rubber case can also be cleaned by soaking it in a mix of borax and soapy water for an hour. Rubber should only be dried with a flat woven lint-free microfiber cloth, such as one of our microfiber suede cloths. Lint and streaks will be eliminated as a result.
Particularly difficult to remove from white rubber or transparent rubber casings are stains that set in dark. Baking soda and water can be used to create a paste that can help remove stubborn grime. Just apply the paste on your rubber case and wait for it to dry for a few hours. The next step is to wash your case once the paste has been removed with a brush. This is a great approach for properly cleaning rubber phone cases.
Read More- What Is Newagtalk.Com? Know More About This!
Board for Phone Case
Dusting your wood phone case more frequently is recommended because wood is the most fragile phone case surface. This will stop particles like oil and grime from damaging the surface or settling into it. If you can help it, try not to use water on your wooden phone case.
Wood can rot if it is constantly submerged in water. Instead, wipe off the case with a dry microfiber cloth on a regular basis to keep the wood looking good. Cloths made from coarser materials like tissues can leave scratches on wood, but the ultra-fine strands in microfiber cloths allow them to pick up dirt without damaging the surface. To clean your wooden phone case, we suggest using the microfiber cloth outlined below.
Moistening a microfiber cloth with a tiny bit of water and wiping your wooden phone cover will help remove filth that has set in. If you need to remove stubborn residue, mix a few drops of white vinegar into water and use that to dampen a cleaning cloth.
Avoid getting any liquid on the wood by instead using the cloth. Finally, dry the area with a microfiber cloth to remove any remaining moisture. Dry wood with a soft, fluffy microfiber towel, like terrycloth, because it absorbs water easily. That way, you can be confident that you’re taking in the information from every nook and cranny. You should always wash and dry along the direction of the grain.
Read More- What Is Toonkor.Com? Know More About This!
Case for Mobile Device Made of Leather
Cleaning a leather phone case requires a gentle cleaner. With a damp microfiber cloth and some mild hand soap, you may give your leather case a light cleaning. Spread the soap out evenly on the cloth and apply. Use a dry cloth and a gentle cleaner. Use a fluffy terry microfiber cloth for drying, rather than a flat woven one. Due to the porous nature of leather, it is important to work into all of the nooks and crannies you can find.
When cleaning or drying, use soft, circular strokes and avoid scrubbing. By doing so, you can avoid overstretching the leather. Keep in mind that the leather case’s appearance and colour might be altered by the products and solutions you use to clean it, so keep things as simple as possible.